3D hydrogel/ bioactive glass scaffolds in bone tissue engineering: Status and future opportunities.

Repairing significant bone defects remains a critical challenge, raising the clinical demand to design novel bone biomaterials that incorporate osteogenic and angiogenic properties to support the regeneration of vascularized bone. Bioactive glass scaffolds can stimulate angiogenesis and osteogenesis. In addition, natural or synthetic polymers exhibit structural similarity with extracellular matrix (ECM) components and have superior biocompatibility and biodegradability. Thus, there is a need to prepare composite scaffolds of hydrogels for vascularized bone, which incorporate to improve the mechanical properties and bioactivity of natural polymers. In addition, those composites' 3-dimensional (3D) form offer regenerative benefits such as direct doping of the scaffold with ions. This review presents a comprehensive discussion of composite scaffolds incorporated with BaG, focusing on their effects on osteo-inductivity and angiogenic properties. Moreover, the adaptation of the ion-doped hydrogel composite scaffold into a 3D scaffold for the generation of vascularized bone tissue is exposed. Finally, we highlight the challenges and future of manufacturing such biomaterials.

Engineering organ-on-a-chip systems to model viral infections.

Infectious diseases remain a public healthcare concern worldwide. Amidst the pandemic of coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 infection, increasing resources have been diverted to investigate therapeutics targeting the COVID-19 spike glycoprotein and to develop various classes of vaccines. Most of the current investigations employ two-dimensional (2D) cell culture and animal models. However, 2D culture negates the multicellular interactions and three-dimensional (3D) microenvironment, and animal models cannot mimic human physiology because of interspecies differences. On the other hand, organ-on-a-chip (OoC) devices introduce a game-changer to model viral infections in human tissues, facilitating high-throughput screening of antiviral therapeutics. In this context, this review provides an overview of thein vitroOoC-based modeling of viral infection, highlighting the strengths and challenges for the future.

Engineering viral genomics and nano-liposomes in microfluidic platforms for patient-specific analysis of SARS-CoV-2 variants.

New variants of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are continuing to spread globally, contributing to the persistence of the COVID-19 pandemic. Increasing resources have been focused on developing vaccines and therapeutics that target the Spike glycoprotein of SARS-CoV-2. Recent advances in microfluidics have the potential to recapitulate viral infection in the organ-specific platforms, known as organ-on-a-chip (OoC), in which binding of SARS-CoV-2 Spike protein to the angiotensin-converting enzyme 2 (ACE2) of the host cells occurs. As the COVID-19 pandemic lingers, there remains an unmet need to screen emerging mutations, to predict viral transmissibility and pathogenicity, and to assess the strength of neutralizing antibodies following vaccination or reinfection. Conventional detection of SARS-CoV-2 variants relies on two-dimensional (2-D) cell culture methods, whereas simulating the micro-environment requires three-dimensional (3-D) systems. To this end, analyzing SARS-CoV-2-mediated pathogenicity via microfluidic platforms minimizes the experimental cost, duration, and optimization needed for animal studies, and obviates the ethical concerns associated with the use of primates. In this context, this review highlights the state-of-the-art strategy to engineer the nano-liposomes that can be conjugated with SARS-CoV-2 Spike mutations or genomic sequences in the microfluidic platforms; thereby, allowing for screening the rising SARS-CoV-2 variants and predicting COVID-19-associated coagulation. Furthermore, introducing viral genomics to the patient-specific blood accelerates the discovery of therapeutic targets in the face of evolving viral variants, including B1.1.7 (Alpha), B.1.351 (Beta), B.1.617.2 (Delta), c.37 (Lambda), and B.1.1.529 (Omicron). Thus, engineering nano-liposomes to encapsulate SARS-CoV-2 viral genomic sequences enables rapid detection of SARS-CoV-2 variants in the long COVID-19 era.

Coaxial 3D bioprinting of tri-polymer scaffolds to improve the osteogenic and vasculogenic potential of cells in co-culture models.

The crosstalk between osteoblasts and endothelial cells is critical for bone vascularization and regeneration. Here, we used a coaxial 3D bioprinting method to directly print an osteon-like structure by depositing angiogenic and osteogenic bioinks from the core and shell regions of the coaxial nozzle, respectively. The bioinks were made up of gelatin, gelatin methacryloyl (GelMA), alginate, and hydroxyapatite (HAp) nanoparticles and were loaded with human umbilical vascular endothelial cells (HUVECs) and osteoblasts (MC3T3) in the core and shell regions, respectively. Conventional monoaxial 3D bioprinting was used as a control method, where the hydrogels, HAp nanoparticles, MC3T3 cells, and HUVECs were all mixed in one bioink and printed from the core nozzle. As a result, the bioprinted scaffolds were composed of cell-laden fibers with either a core-shell or homogenous structure, providing a non-contact (indirect) or contact (direct) co-culture of MC3T3 cells and HUVECs, respectively. Both structures supported the 3D culture of HUVECs and osteoblasts over a long period. The scaffolds also supported the expression of osteogenic and angiogenic factors. However, the gene expression was significantly higher for the core-shell structure than the homogeneous structure due to the well-defined distribution of osteoblasts and endothelial cells and the formation of vessel-like structures in the co-culture system. Our results indicated that the coaxial bioprinting technique, with the ability to create a non-contact co-culture of cells, can provide a more efficient bioprinting strategy for printing highly vascularized and bioactive bone structures.

Role of biomaterials in the diagnosis, prevention, treatment, and study of corona virus disease 2019 (COVID-19).

Recently emerged novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and the resulting corona virus disease 2019 (COVID-19) led to urgent search for methods to prevent and treat COVID-19. Among important disciplines that were mobilized is the biomaterials science and engineering. Biomaterials offer a range of possibilities to develop disease models, protective, diagnostic, therapeutic, monitoring measures, and vaccines. Among the most important contributions made so far from this field are tissue engineering, organoids, and organ-on-a-chip systems, which have been the important frontiers in developing tissue models for viral infection studies. Also, due to low bioavailability and limited circulation time of conventional antiviral drugs, controlled and targeted drug delivery could be applied alternatively. Fortunately, at the time of writing this paper, we have two successful vaccines and new at-home detection platforms. In this paper, we aim to review recent advances of biomaterial-based platforms for protection, diagnosis, vaccination, therapeutics, and monitoring of SARS-CoV-2 and discuss challenges and possible future research directions in this field.

CRISPR/Cas9 mediated GFP-human dentin matrix protein 1 (DMP1) promoter knock-in at the ROSA26 locus in mesenchymal stem cell for monitoring osteoblast differentiation.

BACKGROUND: Dentin matrix protein 1 (DMP1) is highly expressed in mineralized tooth and bone, playing a critical role in mineralization and phosphate metabolism. One important role for the expression of DMP1 in the nucleus of preosteoblasts is the up-regulation of osteoblast-specific genes such as osteocalcin and alkaline phosphatase1 . The present study aimed to investigate the potential application of human DMP1 promoter as an indicator marker of osteoblastic differentiation. METHODS: In the present study, we developed DMP1 promoter-DsRed-GFP knock-in mesenchymal stem cell (MSCs) via the clustered regularly interspaced short palindromic repeats (CRISPR)/CRISPR-associated protein 9 (Cas9) system that enabled automatic detection of osteoblast differentiation. With the application of a homology-directed knock-in strategy, a 2-kb fragment of DMP1 promoter, which was inserted upstream of the GFP and DsRed reporter cassette, was integrated into the human ROSA locus to generate double fluorescent cells. We further differentiated MSCs under osteogenic media to monitor the fate of MSCs. First, cells were transfected using CRISPR/Cas9 plasmids, which culminated in MSCs with a green fluorescence intensity, then GFP-positive cells were selected using puromycin. Second, the GFP-positive MSCs were differentiated toward osteoblasts, which demonstrated an increased red fluorescence intensity. The osteoblast differentiation of MSCs was also verified by performing alkaline phosphatase and Alizarin Red assays. RESULTS: We have exploited the DMP1 promoter as a predictive marker of MSC differentiation toward osteoblasts. Using the CRISPR/Cas9 technology, we have identified a distinctive change in the fluorescence intensities of GFP knock-in (green) and osteoblast differentiated MSCs 2 . CONCLUSIONS: The data show that DMP1-DsRed-GFP knock-in MSCs through CRISPR/Cas9 technology provide a valuable indicator for osteoblast differentiation. Moreover, The DMP1 promoter might be used as a predictive marker of MSCs differentiated toward osteoblasts.

Cell-cell interaction in a coculture system consisting of CRISPR/Cas9 mediated GFP knock-in HUVECs and MG-63 cells in alginate-GelMA based nanocomposites hydrogel as a 3D scaffold.

The interaction between osteogenic and angiogenic cells through a coculturing system in biocompatible materials has been considered for successfully engineering vascularized bone tissue equivalents. In this study, we developed a hydrogel-blended scaffold consisted of gelatin methacryloyl (GelMA) and alginate enriched with hydroxyapatite nanoparticles (HAP) to model an in vitro prevascularized bone construct. The hydrogel-based scaffold revealed a higher mechanical stiffness than those of pure (GelMA), alginate, and (GelMA+ HAP) hydrogels. In the present study, we generated a green fluorescent protein (GFP) knock-in umbilical vein endothelial cells (HUVECs) cell line using the CRISPR/Cas9 technology. The GFP was inserted into the human-like ROSA locus of HUVECs genome. HUVECs expressing GFP were cocultured with OB-like cells (MG-63) within three-dimensionally (3D) fabricated hydrogel to investigate the response of cocultured osteoblasts and endothelial cells in a 3D structure. Cell viability under the 3D cocultured gel was higher than the 3D monocultured. Compared to the 3D monocultured condition, the cells were aligned and developed into the vessel-like structures. During 14 days of culture periods, the cells displayed actin protrusions by the formation of spike-like filopodia in the 3D cocultured model. Angiogenic and osteogenic-related genes such as CD31, vWF, and osteocalcin showed higher expression in the cocultured versus the monocultured. These results have collectively indicated that the 3D cocultured hydrogel facilitates interaction among cells, thereby having a greater effect on angiogenic and osteogenic properties in the absence of induction media.

Key components of engineering vascularized 3-dimensional bioprinted bone constructs.

Vascularization has a pivotal role in engineering successful tissue constructs. However, it remains a major hurdle of bone tissue engineering, especially in clinical applications for the treatment of large bone defects. Development of vascularized and clinically-relevant engineered bone substitutes with sufficient blood supply capable of maintaining implant viability and supporting subsequent host tissue integration remains a major challenge. Since only cells that are 100-200 µm from blood vessels can receive oxygen through diffusion, engineered constructs that are thicker than 400 µm face a challenging oxygenation problem. Following implantation in vivo, spontaneous ingrowth of capillaries in thick engineered constructs is too slow. Thus, it is critical to provide optimal conditions to support vascularization in engineered bone constructs. To achieve this, an in-depth understanding of the mechanisms of angiogenesis and bone development is required. In addition, it is also important to mimic the physiological milieu of native bone to fabricate more successful vascularized bone constructs. Numerous applications of engineered vascularization with cell-and/or microfabrication-based approaches seek to meet these aims. Three-dimensional (3D) printing promises to create patient-specific bone constructs in the future. In this review, we discuss the major components of fabricating vascularized 3D bioprinted bone constructs, analyze their related challenges, and highlight promising future trends.

Evaluation of testis hormonal and histopathological alterations in type I and type II diabetic rats.

BACKGROUND: Diabetes is a devastating metabolic disease that causes long-term damage to various organs. An important leading complication of diabetes is a degenerative effect on the reproductive system including infertility and gonadal dysfunction. This study aimed to evaluate the effects of experimental type I and II diabetes on the levels of luteinizing hormone (LH), follicle-stimulating hormone (FSH), and testosterone. METHODS: Male Wistar rats were randomly divided into four separate groups: (1) type I diabetes (T1DM), (2) type II diabetes (T2DM), (3) cetrorelix acetate-treated nondiabetic control group, and (4) normal untreated group (n = 6). T1DM was experimentally induced by a single injection of alloxan (135 mg/kg) while T2DM was induced by feeding the animals with drinking water enriched with fructose (10%). Cetrorelix acetate (100 mg/kg, intraperitoneal for 1 week) treatment group was used as a positive control. All rats were killed and blood and testes were collected after 8 weeks of the study. The effects of induced diabetes on the levels of blood glucose and insulin were assessed. The levels of sex hormones and insulin were determined by radioimmunoassay. Histological staining was used to check abnormal patterns of testicular morphology, the diameter of seminiferous tubules, testicular diameter, and germinal layer thickness. RESULTS: A significant reduction in the testosterone, FSH, and LH levels were observed in T1DM, T2DM, and also in cetrorelix acetate-treated groups. Analysis of testicular histology sections revealed significantly reduced thickness of cell layer in T1DM and cetrorelix acetate-treated groups compared with the T2DM group. In T2DM, the cell numbers, the thickness of cell layer, the diameter of seminiferous tubules, and weight of testicles were slightly increased. In contrast, total tubules of empty seminiferous increased significantly in T1D and cetrorelix treated groups compared with the control group. CONCLUSION: Overall, diabetes can induce hypothalamus-pituitary-gonad axis dysfunction, affects hormonal secretion, and causes histological damage to testes, collectively leading to deleterious effects on male fertility.

Naturally occurring anti-cancer agents targeting EZH2.

Natural products are considered as promising tools for the prevention and treatment of cancer. The enhancer of zeste homolog 2 (EZH2) is a histone methyltransferase unit of polycomb repressor complexes such as PRC2 complex that has oncogenic roles through interference with growth and metastatic potential. Several agents targeting EZH2 has been discovered but they often induce side effects in clinical trials. Recently, EZH2 has emerged as a potential target of natural products with documented anti-cancer effects and this discloses a new scenario for the development of EZH2 inhibitory strategies with agents with low cytotoxic detrimental effects. In fact, several natural products such as curcumin, triptolide, ursolic acid, sulforaphane, davidiin, tanshindiols, gambogic acid, berberine and Alcea rosea have been shown to serve as EZH2 modulators. Mechanisms like inhibition of histone H3K4, H3K27 and H3K36 trimethylation, down-regulation of matrix metalloproteinase expression, competitive binding to the S-adenosylmethionine binding site of EZH2 and modulation of tumor-suppressive microRNAs have been demonstrated to mediate the EZH2-inhibitory activity of the mentioned natural products. This review summarizes the pathways that are regulated by various natural products resulting in the suppression of EZH2, and provides a plausible molecular mechanism for the putative anti-cancer effects of these compounds.

Exosomes: Nanoparticulate tools for RNA interference and drug delivery.

Exosomes are naturally occurring extracellular vesicles released by most mammalian cells in all body fluids. Exosomes are known as key mediators in cell-cell communication and facilitate the transfer of genetic and biochemical information between distant cells. Structurally, exosomes are composed of lipids, proteins, and also several types of RNAs which enable these vesicles to serve as important disease biomarkers. Moreover, exosomes have emerged as novel drug and gene delivery tools owing to their multiple advantages over conventional delivery systems. Recently, increasing attention has been focused on exosomes for the delivery of drugs, including therapeutic recombinant proteins, to various target tissues. Exosomes are also promising vehicles for the delivery of microRNAs and small interfering RNAs, which is usually hampered by rapid degradation of these RNAs, as well as inefficient tissue specificity of currently available delivery strategies. This review highlights the most recent accomplishments and trends in the use of exosomes for the delivery of drugs and therapeutic RNA molecules.

Novel approaches toward the generation of bioscaffolds as a potential therapy in cardiovascular tissue engineering.

Cardiovascular disease associated with myocardial infarction (MI) is among the leading causes of mortality worldwide, in part, due to the limited regenerative capacity of tissues. Although various approaches have been employed to generate bioartificial myocardial tissues, including surgical reconstruction and the use of biosynthetic or biological cell-free grafts, many challenges still remain. Natural biomaterials based on decellularization have made significant inroads into the development of favorable biomatrices for myocardial tissue regeneration. This process occurs with the concept of removing whole cellular contents, while preserving the extracellular matrix components and all the necessary features of native tissues. Furthermore, acellular-derived matrices serve to stimulate proliferation and recruitment of endothelial cells by providing proliferation signals to cells. This review highlights a novel approach to generate natural three dimensional myocardial scaffolds for clinical applications.

Exosomes as nanocarriers for siRNA delivery: paradigms and challenges.

Exosomes are nano-sized vesicles that facilitate intercellular communications through carrying genetic materials and functional biomolecules. Owing to their unique size and structure, exosomes have emerged as a useful tool to overcome the limitations of siRNA delivery. The use of exosomes as siRNA delivery vehicles lacks certain disadvantages of the existing foreign delivery systems such as viruses, polycationic polymers and liposomes, and introduces several advantages including inherent capacity to pass through biological barriers and escape from phagocytosis by the reticuloendothelial system, as well as being biocompatible, non-toxic, and immunologically inert. Different strategies have been employed to harness exosome-based delivery systems, including surface modification with targeting ligands, and using exosome-display technology, virus-modified exosomes, and exosome-mimetic vesicles. The present review provides a capsule summary of the recent advances and current challenges in the field of exosome-mediated siRNA delivery.

Curcumin as a MicroRNA Regulator in Cancer: A Review.

Curcumin is a natural dietary polyphenol for which anti-tumor effects have been documented. Anti-inflammatory and antioxidant properties of curcumin, along with its immunomodulatory, proapoptotic, and antiangiogenic properties, are often referred to as the main mechanisms underlying the anti-tumor effects. At the molecular level, inhibition of NF-kB, Akt/PI3K, and MAPK pathways and enhancement of p53 are among the most important anticancer alterations induced by curcumin. Recent evidence has suggested that epigenetic alterations are also involved in the anti-tumor properties of curcumin. Among these curcumin-induced epigenetic alterations is modulation of the expression of several oncogenic and tumor suppressor microRNAs (miRNAs). Suppression of oncomiRs such as miR-21, miR-17-5p, miR-20a, and miR-27a and over-expression of miR-34 a/c and epithelial-mesenchymal transition-suppressor miRNAs are among the most important effects of curcumin on miRNA homeostasis. The present review will summarize the findings of in vitro and experimental studies on the impact of curcumin and its analogues on the expression of miRNAs involved in different stages of tumor initiation, growth, metastasis, and chemo-resistance.

Mesenchymal stem cells can survive on the extracellular matrix-derived decellularized bovine articular cartilage scaffold.

OBJECTIVE S: The scarcity of articular cartilage defect to repair due to absence of blood vessels and tissue engineering is one of the promising approaches for cartilage regeneration. The objective of this study was to prepare an extracellular matrix derived decellularized bovine articular cartilage scaffold and investigate its interactions with seeded rat bone marrow mesenchymal stem cells (BM-MSCs). MATERIALS AND METHODS: Bovine articular cartilage that was cut into pieces with 2 mm thickness, were decellularized by combination of physical and chemical methods including snap freeze-thaw and treatment with sodium dodecyl sulfate (SDS). The scaffolds were then seeded with 1, 1'-dioctadecyl-3, 3, 3', 3'-tetramethylindocarbocyanine perchlorate (DiI) labeled BM-MSCs and cultured for up to two weeks. RESULTS: Histological studies of decellularized bovine articular cartilage showed that using 5 cycles of snap freeze-thaw in liquid nitrogen and treatment with 2.5% SDS for 4 hr led to the best decellularization, while preserving the articular cartilage structure. Adherence and penetration of seeded BM-MSCs on to the scaffold were displayed by histological and florescence examinations and also confirmed by electron microscopy. CONCLUSION: ECM-derived decellularized articular cartilage scaffold provides a suitable environment to support adhesion and maintenance of cultured BM-MSCs and could be applied to investigate cellular behaviors in this system and may also be useful for studies of cartilage tissue engineering.

Scaffolds derived from cancellous bovine bone support mesenchymal stem cells' maintenance and growth.

Since bone defects can lead to various disabilities, in recent years, many increasing attempts have been made in bone tissue engineering. In this regard, scaffolds have attracted a lot of attention as three dimensional substrates for cell attachment which improve successful tissue engineering. The aim of the present study was to provide an interconnected porous scaffold to facilitate cell infiltration. To do so, cancellous bone from bovine femur was dissected in fragments and decellularized by physicochemical methods, including snap freeze/thaw, rinsing in hot water and treatment with different solutions of sodium dodecyl sulfate (SDS). Histological analysis and 4',6-diamidino-2-phenylindole staining revealed that the best results were obtained after treatment with 2.5%, 5%, and 8% SDS for 8, 3, or 1 h respectively, which significantly removed bone cells with intact trabeculae geometry. Further characterization of decellularized scaffolds by the compression tests also revealed no significant difference between elastic modulus values of the three different SDS treatments. Moreover, studying the ratio of bone trabeculae to bone surfaces (BT/BS) as assessed by Clemex vision software 3.5 showed that treatment with 2.5% SDS for 8 h resulted in a BT/BS score in the range of native bone and therefore this treatment was used for further experiments. Histological studies and scanning electron microscopy revealed rat mesenchymal stem cells integration, adhesion, and maintenance during the 2 and 7 d of culture in vitro. In conclusion, the present results support the effective role of SDS in cancellous bovine bone decellularization and also propensity of treated samples in providing a suitable three-dimentional environment to support the maintenance and growth of mesenchymal stem cells.